The BASWA Phon Base has a smooth, no groove, slightly structured and mechanically relatively resilient surface. The key advantages: only small amounts of material are needed and the installation times are short. Overall, this product offers a very favorable price-performance ratio.

System profile

• Single layer system

• Granule size in the top coat 0.7 mm

• Quick installation

• Standard color ~ NCS S 0500-N

• Comprehensive color choices (BASWA Colors, NCS, RAL, etc.)

• Fire prevention class A2; S1-d0

Used as a single layer system, BASWA Phon Fine has a smooth, fine surface structure.  The key advantages: only small amounts of material are needed and the installation times are short.

System profile

• Single layer system

• Granule size in the top coat 0.5 mm

• Fine surface structure

• Quick installation

• Standard color ~ NCS S 0500-N

• Comprehensive color choices (BASWA Colors, NCS, RAL, etc.)

• Fire prevention class A2; S1-d0

Double layer systems are used if the surface quality has to meet the highest standards. These requirements may pertain to how fine the surface structure is (BASWA Phon Classic Top – with BASWA Top 0.3 mm as the top coat), or they may be the result of other prerequisites  (vaulted or double vaulted surfaces, surfaces with strong light exposure).

Double layer systems require the placement of a first base coat BASWA Base on the glued acoustic panels, upon which a top coat (coating masses BASWA Base, Fine or Top) is subsequently applied.

System profile

• Double layer systems

• Granule size in the base coat 0.7 mm

• Granule size in the top coat 0.7 mm / 0.5 mm / 0.3 mm

• Finest surface structure (BASWA Classic Top)

• Suitable for surfaces exposed to a lot of light or vaulted surfaces

• Standard color ~ NCS S 0500-N

• Comprehensive color selection (BASWA Colors, NCS, RAL, etc.)

• Maximum surface quality <Q3>

• Fire prevention class A2; S1-d0

The BASWA Natural acoustic panel consists of purely natural and sustainable components. BASWA Natural does not contain any harmful ingredients and has an excellent ecological balance. With acoustic panels made of natural fibres and an open-pored pre-coating of recycled glass granulate, BASWA Natural combines sustainability with excellent sound absorption.

The Natural panels are glued o onto a solid, closed substrate (usually walls, solid ceilings or suspended plasterboard ceilings) with BASWA Fix C or BASWA Fix K, jointed, sanded flat and finally coated seamlessly with the marble BASWA final coatings.

System profile

• Two-layer systems

• Grain size of the base layer BASWA Base = 0.7mm

• Grain size of the final layer BASWA Fine = 0.5 mm

• Medium surface structure of the final layer

• Standard color ~ NCS S 0500-N

• Comprehensive color selection (BASWA Colors, NCS, RAL, etc.)

• Surface quality Standard <Q2> / maximum <Q3>

• Fire classification: B-s1-d0 flame-retardant according to DIN EN 13501-1

The active BASWA Cool system uses an embedded capillary pipe system to provide thermal comfort. It can be installed directly in concrete ceilings or lowered systems.

Large space water transporting capillary pipe mats are installed close to the surface. While they require only a minimum amount of space and energy, they provide draft-free and noiseless room temperature control paired with outstanding sound absorption. Thanks to the small amount of acoustic rendering coverings and the surface proximate installation as well as the good heat conductivity of the mineral-based acoustic stucco, the system delivers outstanding heating and cooling effects.

Properties

• Excellent broadband sound absorption

• Cooling results at Δ8K; 79W / m2 (according to DIN EN 14240:2004 – 04)

• Heating results at Δ15K; 117W / m2 (according to DIN EN 14037- 02)

• Minimal installation height

• Smooth, groove free surface

• Top coat Base, Fine or Top

• Standard color ~ NCS S 0500-N

• Comprehensive color selection (BASWA Colors, NCS, RAL, etc.)

• Construction material class B-s1-d0 according to DIN EN 13501-1

Passive system BASWA Core, which literally transfers the output of thermally activated components to the room with minimal loss also delivers acoustic absorption effects. This system is installed exclusively with activated concrete surfaces. In these applications, BASWA Core  can either be installed in the concrete ceiling of the building’s shell (inlay) or can be mounted to an existing ceiling retroactively during the interior build-out phase.

The BASWA Core System is used in combination with TACS ceilings (thermally active component systems). Its purpose is to lead the energy generated in the room to the thermally activated ceiling through the sound absorbing BASWA Core panel. In new construction projects with the TAC system, pipes (usually made of plastic) are installed above the lowest reinforced steel layer in solid concrete ceilings. Water is used as the heating or cooling medium. The solid concrete ceiling is thermally activated in the vicinity of the pipes, which serve as transfer and storage mass. To ensure that the thermal energy is transferred from the activated concrete ceiling through the sound absorbing system, a specially shaped aluminum profile with a slit is used, which is one of the core components of the BASWA Core panels.

As a user of these thermally conductive acoustic systems, you are effectively taking advantage of the storage capabilities of TACs ceiling systems for heating and cooling purposes in rooms without having to give up the advantages of pleasant room acoustics paired with joint and structure free modern architecture.

Properties

• Excellent broadband sound absorption αw = 0.70

• Heat conductivity 3.08 [W / (mK)

• Thermal effectiveness 85 %

• System thickness

• 30 mm

• Smooth no groove surface

• Top coat Base, Fine or Top

• Comprehensive color choices (BASWA Colors, NCS, RAL, etc.)